|
What's
Included
|
- a powered anode
- pipe-thread seal tape
- instructions
This replaces
the hex-head anode that came with your tank. Fits all brands with
3/4-inch ports, but can be used on tanks with one-inch ports using
a reducer bushing.
|
|
What
Does It Do?
|
- The anode will keep your tank from rusting and breaking, while
alleviating odor problems because of anaerobic bacteria found
in some water that react with regular magnesium or aluminum
anodes to produce hydrogen sulfide gas and a rotten-egg odor.
Manufacturer says this product will last 50 years.
If you have
a vacation cabin where the water heater sits idle, it may be
that, no matter what anode you put in it, the water will still smell
bad. We don't want you to buy a powered anode if it won't
solve your problem. You might do better to replumb your water heater
to allow hydrogen peroxide to easily be added. That WILL solve the
problem. Click here to learn
more. |
|
Tools
Needed
|
| Socket
wrench with 1 1/16-inch socket to remove old anode, adjustable wrench
to tighten new one, which has a 1 1/2-inch hex nut. For further
details, check out Know-How
on our sister site. |
|
|
Important:
Before You Order
|
|
This anode
must replace the one that came with the tank or the smell won't
go away. If your tank has two anodes, the second one must also
be removed.
It is possible
that the opening in the top of the tank will have to be enlarged
with snips to accommodate the hex nut, which is larger than that
of a sacrificial anode.
If you have
a power-vent heater, check the location of the anode to see if
the power anode will get in the way of the power-vent housing.
If you
have any doubts about what you're ordering, be sure and e-mail
your questions to us. We want you to order only what you need!
info@smellywater.com
If you install
this device in a way significantly differently from the instructions,
you may void the warranty. Contact us if you have an unusual installation
problem and we can probably help.
|
|
Return
Policy
|
| Merchandise
in original condition can usually be returned for a full refund
of the purchase price, not including shipping. E-mail info@smellywater.com
for instructions and authorization. If the electrode has been stretched
out and/or immersed in water, the device cannot be returned.
|
| |
|
Ordering
Details
|
|
The products
offered here are designed to make water heaters last longer, or
solve specific problems. Installation is potentially do-it-yourself,
but if you have the least doubt about your abilities, we suggest
that you obtain expert help.
Prices include
UPS Ground shipping within the contiguous United States. Allow
1-2 weeks for shipping, but we usually ship same day. If you are
in Hawaii or Alaska, go here;
if you're in Canada, go here.
|
|
|
|
|
|
|
$242,
shipping included.
|
|
